APC Smart UPS 620...

Output

• Output power capacity 620 VA
• Output power capacity 390 Watts
• Output Voltage 230 V
• Output Connections (4)IEC-320-C13 (2)IEC M/F 2M Jumper Cords
• Waveform type Stepped approximation to a sine wave
• Transfer time 2ms typical

Input

• Nominal input voltage 230 V
• Input frequency 50/60 Hz +/- 3 Hz (auto sensing)
• Input connection IEC-320-C14

Batteries

• Typical backup time at half load 15.3 minutes
• Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte; leakproof
• Typical recharge time 6 hour(s)
• Replacement battery cartridge RBC4

Communications & Management

• Interface port RS-232 communications port
• Management Software included PowerChute Smart-UPS Bundle
• Optional Software Click here to view other Software options.
• Control panel LED status display with On Line; On Battery; Replace Battery; and Overload indicators
• Audible alarm Alarm when on battery; distinctive low battery alarm; configurable delays
• Emergency Power Off (EPO) N/A

Surge Protection and Filtering

• Surge energy rating (Joules) 320
• Filtering Full time multi-pole noise filtering; 0.7% IEEE surge let-through; zero clamping response time; meets UL 1449

Physical

• Maximum height dimensions 6.60 inches, 16.8 cm
• Maximum width dimensions 4.70 inches, 11.9 cm
• Maximum depth dimensions 14.50 inches, 36.8 cm
• Net weight 27 lbs, 12.3 kg
• Shipping weight 29 lbs, 13.2 kg
• Color Biege

Environmental

• Operating environment 0-40 degrees C (32-104 F); 0-95% Relative Humidity; 0-3000 meters elevation (0-10000 ft)
• Storage conditions -15 - 45 degrees C (32-120 F); 0-95% Relative Humidity; 0-15000 meters elevation (0-50000 ft)
• Audible noise at 1 meter from surface of unit 45 dBA
• Online thermal dissipation 70 BTU/hr

Conformance

• Approvals CE;EN50091-1;EN50091-2;GOST;PCBC;VDE
• Standard warranty 2 years repair or replace;optional on-site warranties available;optional extended warranties available